|
Strip & Mini-Tubular Heaters
Mighty-Tuff Strip Heaters
The Mighty-Tuff
Strip Heater provides high temperatures, extreme watt densities
and quick responses in applications where previously, any other
type of strip heater could not be considered. Heat is transferred
rapidly from the resistance element to the sheath for lower internal
temperatures and long life. The thin but rugged design can produce
high sheath temperatures at high watt densities. The Mighty-Tuff
is versatile with the availability of widths to 6" and lengths
to 42". In the most difficult application or in normal use,
the Mighty-Tuff will significantly improve strip heater performance.
Careful consideration in clamping strip heaters to the surface
will improve heat transfer and extend heater length of service.
 (PDF file
- 4k)
 |
 |
 |
| 2-1/2" wide
Mighty-Tuff with SG terminals. SG terminals are perpendicular
to the length and have 10-24 threads. Available on 2" and
wider. |
|
2-1/2" wide
Mighty-Tuff with SG terminals and 3/8" diameter mounting
holes. |
 |
|
 |
| 7/8" wide Mighty-Tuff
Strip Heater with SE terminals. 10-24 threads with a terminal
at each end is the standard design. |
|
7/8" wide Mighty-Tuff
with SE terminals and 3/8" diameter mounting holes. |
 |
|
 |
| Mighty-Tuff Strip
heaters can be supplied with any lead configuration as shown
on Mighty-Tuff Bank Heater section, such as Type F, C, A, R or
P. The illustration is with Type C Armor Cable protected leads. |
|
Ordering Information
 Catalog
Number
Length
and width
Watts
and Volts |
Mounting hole
size and location, if required
Type
of termination and lead length
Drawing
or sketch if necessary |
|
