Radiant Heaters

Quartz Heaters Quartz Tube Radiant Process Heaters Modular Quartz Heater Assemblies Golden-Ray Quartz Radiant Process Heaters QRH1 Quartz Lamp Radiant Process Heaters

Introduction | FP Flat Panel Infrared Heaters | Black Body / Chameleon Ceramic Infrared Heaters | HR Radiant Process Heaters | Quartz Radiant Process Heaters

QRH1 Quartz Lamp Infrared Heaters

The most recent addition to the Ogden infrared product line is the QRH1 Quartz Lamp Infrared Heater. Translucent fused quartz provides the most efficient heat transfer capability and the quickest responding radiant heat source available. A tungsten filament is centered in a hermetically sealed quartz tube and insulated with an inert gas. Peak wave length is 1 - 1.5 microns, in the near band of the electromagnetic spectrum. The element temperature is 4000°F and very bright when in operation. Faster process speeds are possible compared to other infrared heat sources. Heat-up and cool-down are especially quick. QRH1 Quartz Lamp assemblies include an easily installed, rugged aluminum housing with a polished reflector. Along with FP Flat Panel, Black Body Ceramic, HR Metal Sheath and Quartz Tube heaters, the QRH1 Quartz lamp gives Ogden the most comprehensive selection of radiant heat sources available.

Paint Drying Print Drying Thermoforming Semiconductor Water Preheating & Drying Preheating or Vulcanizing Rubber Drying or Glazing on Ceramic Tiles Laminating Thermal Adhesive Activation Plastic Welding Wax Drying Preheating Welding Seams Environmental Chambers Resin Curing Sterilizing Heat Set Synthetic Fibers & Fabric Water & Solvent Evaporation Paper Pulp Drying Tempering Layered Glass Powder Coating Heat Staking Thermography     High Process Temperatures Short wave length, high intensity infrared heat source can increase work speeds. Quick Heat and Cool Response Immediate operating temperatures and quick cool-down for web or conveyorized processes where work speed may slow or stop. Elements are resistant to thermal shock. Careful handling and protection are required. Horizontal Mounting Only Housing mounts easily in any position in horizontal plane. Control Quartz Lamp Infrared Heaters are controlled using phase angle fired SSR's, SCR's or variable transformers. Do not use ON-OFF control. Housing Polished aluminum reflector is easily cleaned to provide efficient operation. Snap in protective grills are available.

Watts	Volts	Overall Length A	EHL B	QRH1 Catalog Number	Replacement Elements
500	120	12-5/8"	5"	QRH1-0512-1	Q-088-05-1
1000	240	17-3/4"	10"	QRH1-1017-2	Q-138-10-2
1600	240	23-3/4"	16"	QRH1-1623-2	Q-198-16-2
2500	480	32-3/4"	25"	QRH1-2532-4	Q-288-25-4

WARNING: Elements are extremely bright - do not mount in line-of-sight. Maximum temperature in termination area - 650°F.

ON-LINE QUOTATION & ORDER FORM | PDF PRODUCT DATA SHEET (35k PDF file)

|

back to beginning of section