Hot Runner Controls

Introduction | Temperature Control Modules | Mainframes 15A | High Power Mainframes 30 Amp

TC-2000 Main Frames Standard 15 Amp. Index

1 Zone Main Frame MF-1 2 Zone Main Frame MF-2 Max. Amperage 15 Amps Total of 20 Amps for system Power 240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. Mold Interface Accomplished through 1 single 5 wire cable construction of 2 thermocouple leads, 2 power leads and 1 ground lead per zone. Vital Feature Anti-Arching circuitry Construction Steel frame with handle; air vent on bottom & side for cooling; top & bottom module insertion guides; 4 rubber feet; 3 pin male AC input socket installed on top of main frame; 5 pin female power/thermocouple connector (1Z-FC) with latch installed on top of main frame and 3 prong input power cord plug (1Z-PP without input cord) is supplied. NOTE :  If a power/thermocouple cable (PTC-1) is not ordered with main frame, 1 or 2 male cable connector/s (1Z-ME) will be provided. Dimensions & Weight 9" (H) x 7" (W) x 11.5" (D); Approx. 7 lbs (without modules & cables) Compatibility Compatible with industry standard control modules and main frames

Five Zone Main Frame MF-5-150 Max. Amperage 15 Amps per zone Power 240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. Circuit Breaker 50 Amps, 3 Pole ** Vital Feature Anti-Arching circuitry Thermocouple Type "J" Mold Interface Accomplished through dedicated power cord with ground (PWC-5) and Thermocouple cable (THC-5) Construction Heavy duty welded aluminum frame; air vent on bottom & side for cooling; top & bottom module insertion guides. Thermocouple Connector (FCK-TC, 25 pin, male) & Power Connector (FCK-PR, 25 pin, female) are mounted on the LHS of the main frame. Input power cord grip is mounted on RHS of the main frame (input power cord in not supplied). Completely self contained with no external components required. PFS-5 Floor Stand can be used to mount the main frame. It accepts all ITC temperature control modules. Dimensions & Weight 9" (H) x 20.25" (W) x 11.5" (D); Approx. 15 lbs (without modules & cables) Compatibility Compatible with industry standard control modules and main frames   Top

Eight Zone Main Frame MF-8-150 Sixteen Zone Main Frame MF-16-170 Sixteen Zone Main Frame MF-16-250 Circuit Breaker (1) 50 Amps, 3 Pole ** (1) 70 Amps, 3 Pole ** (2) 50 Amps, 3 Pole ** Single 8 Zone main frame construction Two 8 Zone Main Frames stacked construction Two 8 Zone Main Frames stacked construction Max. Amperage 15 Amps per zone Power 240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. Vital Feature Anti-Arching circuitry Thermocouple Type "J" Mold Interface Accomplished through dedicated power cord with ground (PWC-8) and Thermocouple cable (THC-8) Construction Heavy duty welded aluminum frame; air vent on bottom & side for cooling; top & bottom module insertion guides. Thermocouple Connector (FCK-TC, 25 pin, male) & Power Connector (FCK-PR, 25 pin, female) are mounted on the LHS of the main frame. Input power cord grip is mounted on RHS of the main frame (input power cord in not supplied). Completely self contained with no external components required. PFS-812 Floor Stand can be used to mount the main frame. It accepts all ITC temperature control modules. Compatibility Compatible with industry standard control modules and main frames Dimensions & Weight (without modules & cables) 9" (H) x 20.25" (W) x 11.5" (D); Approx. 15 lbs  18" (H) x 20.25" (W) x 11.5" (D); Approx. 32 lbs  18" (H) x 20.25" (W) x 11.5" (D); Approx. 32 lbs    Top

Twelve Zone Main Frame MF-12-150 Twenty Four Zone Main Frame MF-24-250 Thirty Six Zone Main Frame MF-36-350 Circuit Breaker (1) 50 Amps, 3 Pole ** (2) 50 Amps, 3 Pole ** (3) 50 Amps, 3 Pole ** Modular Construction Single 12 Zone main frame construction Two 12 Zone Main Frames stacked construction. Rigidly connected & pre-wired. Three 12 Zone Main Frames stacked construction. Rigidly connected & pre-wired. Dimensions & Weight (without modules & cables) 9" (H) x 28.25" (W) x 11.5" (D); Approx. 20 lbs  18" (H) x 28.25" (W) x 11.5" (D); Approx. 42 lbs  27" (H) x 28.25" (W) x 11.5" (D); Approx. 66 lbs  Max. Amperage 15 Amps per zone Power 240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. Vital Feature Anti-Arching circuitry Thermocouple Type "J" Mold Interface Accomplished through dedicated power cord with ground (PWC-12) and Thermocouple cable (THC-12) Construction Heavy duty welded aluminum frame; air vent on bottom & side for cooling; top & bottom module insertion guides. Thermocouple Connector (FCK-TC, 25 pin, male) & Power Connector (FCK-PR, 25 pin, female) are mounted on the LHS of the main frame. Input power cord grip is mounted on RHS of the main frame (input power cord in not supplied). Completely self contained with no external components required. PFS-812 Floor Stand can be used to mount the main frame. It accepts all ITC temperature control modules. Compatibility Compatible with industry standard control modules and main frames   Top

Twenty Zone Mainframe MF-20-170 Twenty Zone Mainframe MF-20-250 Circuit Breaker (1) 70 Amps, 3 Pole ** (2) 50 Amps, 3 Pole ** Modular Construction 8 Zone Main Frame is mounted on 12 Zone Main Frame. Rigidly connected & pre-wired. 8 Zone Main Frame is mounted on 12 Zone Main Frame. Rigidly connected & pre-wired. Dimensions & Weight (without modules & cables) 18" (H) x 28.25" (W) x 11.5" (D); Approx. 37 lbs  Max. Amperage 15 Amps per zone Power 240 VAC, Single Phase, 3 Wire (2 AC & 1 Ground), 50-60 Hz. Vital Feature Anti-Arching circuitry Thermocouple Type "J" Mold Interface Accomplished through dedicated power cord with ground (PWC-12 & PWC-8) and Thermocouple cable (THC-12 & THC-8) Construction Heavy duty welded aluminum frame; air vent on bottom & side for cooling; top & bottom module insertion guides. Thermocouple Connector (FCK-TC, 25 pin, male) & Power Connector (FCK-PR, 25 pin, female) are mounted on the LHS of the main frame. Input power cord grip is mounted on RHS of the main frame (input power cord in not supplied). Completely self contained with no external components required. PFS-812 Floor Stand can be used to mount the main frame. It accepts all ITC temperature control modules. Compatibility Compatible with industry standard control modules and main frames   Top